TOP STRIPPING AND DEEP STRIPPING
Strip four times as fast with the Excentrmethod
Strip up to 4x faster with the Excentr Method! Thanks to the 2850 rpm and high working pressure, both top and bottom stripping is easier than ever. The Excentr Method offers you the possibility to strip dry, with only water or traditionally with stripper.
3 ways of stripping
Il existe plusieurs techniques de décapage de sols, la « méthode humide » restant toujours la plus efficace.
Dry method
If you want to strip dry, please do so low in dust. That is why we recommend the Excentr Splash & Dust Guard in combination with the Excentr Dust Control vacuum. In this way you work without cross-pollination dust and you also pick up about 50% of the dust from the floor. The dry method can have many advantages over wet methods in specific cases. To be able to strip properly you use pads with an addition of diamond or aluminium oxide.
Extreme build-up/edge build-up
In case of an extreme build-up and/or edge build-up, the floor can first be stripped/grinded with a grinding net. Use 60 / 80 or 100 grit, depending on the structure, to remove the first layers of polymer. Try to remove about 80% of the polymer. Then continue with the method described above to avoid damaging the floor itself with the aggressive grinding net.
For edge construction you can choose to cut the grinding net to size over the main side and place it on a normal stripping pad. Then work the main side of the machine (sideways) over the edge build-up to only aggressively tackle the edge build-up with the grinding net.
Pay close attention during the above processes. If you strip too far with these coarse and aggressive grinding nets, the surface may be damaged.
Curious about how we can contribute to your floors?
Click here and request a free, no-obligation demonstration!
The technique of the future
Excentr is a young Dutch manufacturer of innovative cleaning machines. Since the start of 2015, we have been active worldwide and we have been telling professionals, mostly in the cleaning sector, of the “Excentr method”. We develop machines with the following spearheads: durability, robustness and effectiveness. That is why the machine parts are of the toughest quality. It is also why our machines are almost entirely made of stainless steel. We manufacture our machines with the greatest of care and are convinced of their reliability. All of our machines have a minimum 12-month warranty and they even have a LIFETIME warranty if under a service contract. Excentr produces the Excentr machines and accessories in Goes, Zeeland.
Request a demonstration
Request a demonstration using the contact form on the right.
Would you like to have a demonstration at your location? Experience with your own eyes the effectiveness and convenience of the Excentrmethod!